The Horl knife sharpening range replicates the sharpening action of a whetstone whilst removing the guesswork. The magnetic angle support ensures a consistent sharpening motion every time.
Simply attach your knife to the magnetic angle support and roll the Horl 2 Cruise along the edge of the blade, then do the same on the opposite side. Finish off by repeating this action with the stainless steel honing disc. You will only need to roll the honing disc along the blade edge a few times.
The magnetic angle support included with the Horl 2 Cruise has a 20-degree grinding angle. The 20-degree angle can be used with a wide range of knives and can also be used to sharpen pocket knives. It delivers sharpness in a short time and due to the stability of the cutting edge will retain its sharpness for a long time.
The strong neodymium magnets and the Horl S-Pad ensures your knife is securely fixed during sharpening. This means you can safely sharpen your knives without risk of injury, the anti-slip effect of the S-pad means even small blades can be sharpened consistently.
The industrial diamonds used are suitable for efficiently sharpening all knife steels of any degree of hardness without water. When used properly, the HORL® Diamond Standard never needs to be replaced. The grain size of 46 μm, grinds efficiently and precisely.
Industrial diamonds are considered one of the most durable and effective abrasives on the market. The monocrystalline diamonds are harder than any knife steel. By using a galvanic process, the diamonds in the HORL® Diamond Standard are fixed to approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface will become finer and the HORL® Diamond Standard reaches its ideal grinding surface.
The Horl 2 Cruise contains:
Horl 2 Cruise Sharpener
Magnetic angle support with a 20-degree angle
Grinding Disc
Stainless Steel Honing Disc
